94
Please note that the smoke alarm(s)
will renew the alarm if the measure-
ments of the devices indicate that a
serious situation does exist.
Possible causes of error
messages
1. The device to be assigned to a radio
group is not in connection mode. The
connection mode is active after its acti-
vation for approx. 10 minutes.
For reactivating the connection mo-
de, please follow the instructions in:
„Repeating connection attempt“
2. The devices in the radio group which
has another smoke alarm device wi-
th radio link to be assigned, are not
in connection mode. The connection
mode is active after its activation for
approx. 10 minutes.
For activating the connection mo-
de, please follow the instructions in
„Expanding radio group/Restarting
connection mode“.
en
To Next Page
Loading...
Need help?
General
