Jung Smart Visu Server Series - Page 119

SV- SERVER / SV-SERVER-INT 118 / 187
8.4.4.2 Motor
If required, the function type "Motor" can be depicted by one of three KNX functions.
UP/DOWN/STOP:
The "UP/DOWN/STOP " function (1) is the KNX function for simple control of motorised
drives without feedback objects. The motorised drive can be activated by the group
addresses "Long time" (2) and "Short time" (3).
Figure 91: Parameters of the "Up/Down/Stop" function
The function possesses the following individualisation options within the icon library (4).
KNX function
Selection of the icon library in SV-Control
Operating and display element in SV-Home
UP/DOWN/STOP
Table 40: Display of the "Up/Down/Stop" function
1
2
3
4