8 SV-Control
This chapter describes the configuration and commissioning of the Smart Visu Server
using SV-Control in detail.
8.1 Project tab
The "Project" tab serves as the homepage of SV-Control. Here, it is possible to set the
required language (1), start project design (2), back up the overall project (3) or restore a
previously backed up project (4).
After project design has been completed, access to the project design functions can be
protected by assigning a password (5).
In addition, the product documentation (6) is stored in SV-Control in German and English.
Figure 73: SV-Control, Project tab
8.1.1 Manage language
The desired project design language (1) can be specified in the "Project" tab. It is possible
to change over the language settings during commissioning or at a later time.
The following languages are available in the selection menu (1):
8.1.2 Start
Begin project design of the Smart Visu Server using the " " button (2).
8.1.3 Backing up a project
The backup of the current project design can be triggered using the " " button (3).
This operation can take a moment to complete. Then, the project design can be
downloaded using the " " button (3).
To Next Page
Loading...
Need help?
General
