Jung Smart Visu Server Series User Manual

SV- SERVER / SV-SERVER-INT 96 / 187
8.3 Hue
The "Hue" tab is used for the definition of the Philips Hue Bridge and to import previously
integrated Hue devices and other ZigBee Light Link components.
The "Hue" tab can be operated fully for both profiles (Administrator/User).
8.3.1 Defining the Hue-IP Gateway
The Smart Visu Server supports the integration, visualisation and operation of the Philips
Hue System.
To be able to use the hue functionality of the Smart Visu Server, a Philips Hue Bridge is
required, which can be reached from the Smart Visu Server via the IP network. In addition,
the Philips Hue System must have been commissioned. Please refer to the manufacturer's
documentation for the appropriate steps.
The IP address of the Philips Hue Bridge is automatically detected by the Smart Visu
Server and displayed in the "Hue-IP-Gateway" (2) text box. If another Philips Hue Bridge
apart from the suggested one is to be coupled to the Smart Visu Server, then you can edit
the IP address manually.
To couple the Bridge with the Smart Visu Server, press the Pairing button of the Bridge for
authentication (1).
Successful pairing is visualised by a green checkmark ( ) at the end of the input line (3). A
faulty connection or unsuccessful pairing is visualised by an orange triangle ( ) in the
same location.
Figure 77: Defining the Philips Hue Bridge
2
3
1

Jung Smart Visu Server Series Specifications

General

Brand	Jung
Model	Smart Visu Server Series
Category	Server
Language	English