Jung Smart Visu Server Series - Page 123

SV- SERVER / SV-SERVER-INT 122 / 187
8.4.4.3 Climate
If required, the function group "Climate" can be depicted by various KNX functions.
Status Heat/Cool (KNX):
The "Status Heat / Cool" function (1) allows the display of the current status of a binary
climate actuator system. If, for example, your electrical underfloor heating is switched on,
then this function can be displayed in SV-Home.
Figure 94: Parameters of the "Status Heat/Cool" function
The group address to be visualised can be specified in the input field (2). Using the
selection menu (3), you can specify this group address as the initialisation address for this
function.
The function possesses the following individualisation options within the icon library (5).
KNX function
Selection of the icon library in SV-Control
Operating and display element in SV-Home
Status Heat/Cool
Table 43: Display of the "Status Heat / Cool" function
1
2
3
4