Jungheinrich ECR 327 User Manual

0705.USA
E 40
*
)
only in conjunction with information display (CANDIS (o))
Keypad error messages
The following errors are indicated by the LED (22) flashing red:
– New master code same as operator code.
– New operator code same as master code.
– Operator code to be changed does not exist.
– Operator code to be changed to an existing operator code.
– Operator code to be deleted does not exist.
– Code buffer is full.
No. Function Range
Setting value
Standard
Setting
value
Notes
Procedure
Code lock
021 Travel program 1 *
)
enable
0 or 1 1 0 = Travel program
not enabled
1 = Travel program
enabled
022 Travel program 2 *
)
enable
0 or 1 1 0 = Travel program
not enabled
1 = Travel program
enabled
023 Travel program 3 *
)
enable
0 or 1 1 0 = Travel program
not enabled
1 = Travel program
enabled
030 Shows number of
operator codes assigned*
)

Jungheinrich ECR 327 Specifications

General

Brand	Jungheinrich
Model	ECR 327
Category	Trucks
Language	English