Jungheinrich EJD 220 User Manual

The keypad consists of 10 digit keys, a Set key (76)
and a o key (78).
Digit keys
The digit keys are used to enter the user or master
code and select the travel program.
The green LEDs of the digit keys 1, 2 and 3 (73, 74,
75) show the travel program setting.
o key
Pressing the o key switches the truck off and sets it
to "non operational" status.
The o key indicates the follow operating conditions via a red / green LED (77):
– Code lock function (commissioning the truck).
– Error display configuring the user code.
– Adjusting the travel program depending on the setting and truck.
– Setting and changing parameters.
SET key
When you change the parameters the SET key (76) acts as a confirmation key.
76
73
74
75
78
77
105
04.19 en-GB

Jungheinrich EJD 220 Specifications

General

Brand	Jungheinrich
Model	EJD 220
Category	Forklifts
Language	English