4.3 Cleaning
4.3.1 Cleaning the truck
CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
u
Disconnect the battery before starting cleaning work.
u
Carry out all necessary safety measures to prevent sparking before cleaning (e.g.
by short-circuiting).
CAUTION!
Risk of component damage when cleaning the truck
Cleaning with a pressure washer can result in malfunctions due to humidity.
u
Cover all electronic system assemblies (controllers, sensors, motors etc.) before
cleaning the truck with a pressure washer.
u
Do not hold the jet of the pressure washer by the marked points to avoid damaging
them (see page 29).
u
Do not clean the truck with pressurised water.
Z
The truck may only be cleaned in the designated locations, which adhere to the
stipulations of the country of use.
170
04.19 en-GB
To Next Page
Loading...
Need help?
General
