Jungheinrich EJD 220 - Drive Panel Disassembly and Assembly

4.5 Drive panel disassembly and assembly
The drive panel consists of two halves (68 and 106).
Drive panel disassembly
Tools and Material Required
– Allen key
Procedure
• Turn the tiller to the right limit position.
• Remove 2 screws (107).
• Carefully remove the first half (68).
• Turn the tiller to the left limit position.
• Release the second half (106) and
carefully remove it.
The drive panel is now disassembled.
106
107
68
Drive panel assembly
Tools and Material Required
– Allen key
Procedure
• Turn the tiller to the right limit position.
• Carefully insert the first half (68).
• Tighten the first half (68) with 2 screws (107).
• Turn the tiller to the left limit position.
• Carefully insert the second half (106).
• Tighten the second half (106) with 2 screws (107).
The drive panel is now assembled.
174
04.19 en-GB