The parameter is now saved.
Testing an altered parameter
Requirements
– The parameter is now saved.
Procedure
• Press the O key (78).
• Enter the master code.
• Enter the four-digit parameter number "1377" and confirm with the Set key.
• Enter sub index "2" and confirm with the Set key.
The parameter with subindex are displayed alternately with the current reading.
E.g. (1377-2<->0000-2--corresponds to the "dry - maintenance-free" battery type.
• Press the O key.
The parameter has now been checked.
131
04.19 en-GB
To Next Page
Loading...
Need help?
General
