Jungheinrich EJD 220 User Manual

8.11.3 Changing the Set-up Code
Requirements
– The truck is switched on, see
page 148.
Procedure
• Press the key below the "Settings"
symbol (94).
• Press the key below the "Change set-
up code" symbol (95).
• Enter the set-up code using the keys
below the display unit (63).
The set-up code entered is shown as
filled-in circles.
• Press the key below the "Delete"
symbol (96).
The set-up code is deleted.
• Enter the new set-up code using the
keys below the display unit (63).
Z
The new set-up code must be different
from existing access codes.
• Press the key below the "Confirm"
symbol (97).
The new set-up code is displayed.
Z
If the new set-up code has been
entered incorrectly, delete it and add a
set-up code again.
To return to the main menu, press the
key below the "Back" symbol (98).
The set-up code has been changed.
96
94
97
63
98
95
144
04.19 en-GB

Jungheinrich EJD 220 Specifications

General

Brand	Jungheinrich
Model	EJD 220
Category	Forklifts
Language	English