Jungheinrich EJD 220 User Manual

8.13.5 Deleting transponders
Requirements
– The truck is switched on, see
page 153.
Procedure
• Press the key below the "Settings"
symbol (94).
• Press the key below the "Edit
transponder" symbol (100).
The set-up transponder is
requested.
• Place the set-up transponder on the
transponder reader (93).
All transponder codes are shown on
the display unit (63).
• Select the transponder code to be
deleted using the key below the
"Down selection" symbol (102).
• Press the key below the "Delete"
symbol (96).
The transponder has been deleted.
• To return to the main menu, press
the key below the "Back"
symbol (98).
94
98
96
102
93
100
63
156
04.19 en-GB

Jungheinrich EJD 220 Specifications

General

Brand	Jungheinrich
Model	EJD 220
Category	Forklifts
Language	English