5 Battery removal and installation 55
5.1 Lateral battery removal 56
.
E Operation 59
.
1 Safety Regulations for the Operation of Forklift Trucks 59
2 Displays and Controls 61
2.1 Battery discharge monitor 65
2.2 Battery discharge indicator 66
3 Preparing the Truck for Operation 67
3.1 Checks and Operations to Be Performed Before Starting Daily Work 67
3.2 Preparing the truck for operation 68
3.3 Checks and operations to be carried out when the truck is operational 69
3.4 Parking the truck securely 70
4 Industrial Truck Operation 71
4.1 Safety regulations for truck operation 71
4.2 Emergency Disconnect 73
4.3 Automatic braking 75
4.4 Travel 76
4.5 Slow travel 79
4.6 Steering 79
4.7 Brakes 80
4.8 Load handler raise/lower 82
4.9 Lifting, transporting and depositing loads 85
4.10 Use as a Lift Work Table 94
5 Troubleshooting 95
5.1 Truck does not start 96
5.2 Load cannot be lifted 98
6 Operating the truck without its own drive system 99
6.1 Release and activate the drive wheel brake 99
7 Load handler emergency lowering 101
8 Optional equipment 102
8.1 Emergency operation with service key GF60 102
8.2
CanCode Keypad (o) 104
8.3 Setting the truck parameters with CanCode 123
8.4 Parameters 125
8.5 Setting the Battery Parameters with CanCode 130
8.6
CanDis Display Instrument (o) 132
8.7 Display unit (2 inch display) 134
8.8 Keyless Access System 139
8.9 General Information about the Use of Keyless Access Systems 140
8.10 Commissioning the Keypad and the Transponder Reader 140
8.11 Using the Display: 143
8.12 Using the Keypad 148
8.13 Operating the transponder reader 153
8.14
ISM access module (o) 157
.
F Industrial Truck Maintenance 159
.
1 Operational Safety and Environmental Protection 159
2 Maintenance Safety Regulations 160
2.1 Working on the electrical system 161
2.2 Consumables and used parts 161
2.3 Wheels 161
8
04.19 en-GB
To Next Page
Loading...
Need help?
General
