Juniper ACX5048 - Dhcp-Relay (ACX Series)

dhcp-relay (ACX Series)
Syntax dhcp-relay {
active-server-group server-group-name;
group group-name {
active-server-group server-group-name;
interface interface-name {
exclude;
overrides {
...
}
trace;
upto upto-interface-name;
}
overrides {
...
}
relay-option {
...
}
relay-option-82 {
...
}
}
overrides {
always-write-giaddr;
always-write-option-82;
disable-relay;
interface-client-limit number;
layer2-unicast-replies;
no-arp;
no-bind-on-request;
replace-ip-source-with;
send-release-on-delete;
trust-option-82;
}
relay-option {
option-number option-number;
default-action {
drop;
forward-only;
relay-server-group group-name;
}
equals (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
relay-server-group relay-server-group;
}
starts-with (ascii ascii-string | hexadecimal hexadecimal-string) {
drop;
forward-only;
local-server-group local-server-group;
relay-server-group relay-server-group;
}
1491Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements