Juniper ACX5048 - Protection-Group

protection-group
Syntax protection-group {
ethernet-ring ring-name {
data-channel {
vlan number
}
east-interface {
control-channel channel-name {
vlan number;
interface name interface-name
}
}
guard-interval number;
node-id mac-address;
restore-interval number;
ring-protection-link-owner;
non-revertive;
wait-to-block-interval number;
major-ring-name name;
propagate-tc;
compatibility-version (1|2);
ring-id number;
non-vc-mode;
dot1p-priority number;
west-interface {
control-channel channel-name {
vlan number;
interface name interface-name
}
virtual-control-channel {
west-interface name;
east-interface name;
}
}
}
control-vlan (vlan-id | vlan-name);
east-interface {
node-id mac-address;
control-channel channel-name {
vlan number;
interface name interface-name
}
interface-none
ring-protection-link-end;
}
}
control-channel channel-name {
vlan number;
interface name interface-name
}
}
data-channel {
vlan number
Copyright © 2017, Juniper Networks, Inc.1680
ACX Series Universal Access Router Configuration Guide