Juniper EX9200 Series

tcp {
raise-internet-control-priority;
}
}
interfaces {
... the interfaces subhierarchy appears after the main [edit class-of-service] hierarchy
...
}
}
restricted-queues {
forwarding-class class-name queue-number;
}
rewrite-rules {
(dscp | dscp-ipv6 | exp |frame-relay-de | ieee-802.1 | ieee-802.1ad | inet-precedence)
rewrite-rule {
forwarding-class class-name {
loss-priority level code-point (alias | bits);
}
import (rewrite-rule | default);
}
}
routing-instances routing-instance-name {
classifiers {
dscp (classifier-name | default);
dscp-ipv6 (classifier-name | default);
exp (classifier-name | default);
ieee-208.1 (classifier-name | default | encapsulated | vlan-tag (inner | outer));
}
}
scheduler-maps {
map-name {
forwarding-class class-name scheduler scheduler-name;
}
}
schedulers {
scheduler-name {
adjust-minimum value;
adjust-percent value;
buffer-size (exact | percent percentage | remainder);
drop-profile-map loss-priority (any | high | low | medium-high | medium-low)
protocol any;
excess-priority (high | low | medium-high | medium-low);
excess-rate (percent percentage | proportion proportion);
priority (high | low | medium-high | medium-low | strict-high);
shaping-rate (bps | percent percentage | burst-size size);
transmit-rate (bps | percent percentage | remainder) <exact | rate-limit>;
}
}
traceoptions {
file <files number> <match regular-expression> <size maximum-file-size>
<world-readable | no-world-readable>;
flag flag;
no-remote-trace;
}
traffic-control-profiles {
profile-name {
31Copyright © 2013, Juniper Networks, Inc.
Chapter 4: Configuration Statements