Juniper JUNOS OS 10.4

auto-discovery;
}
}
}
}
}
}
Configuration of P
router
MPLS only, no CFM needed:
[edit]
interfaces {
ge-5/2/7 {
# Connected to PE1
unit 0 {
family inet {
address 10.200.1.10/24;
}
family mpls;
}
}
ge-0/1/0 {
# Connected to PE2
unit 0 {
family inet {
address 10.100.1.10/24;
}
family mpls;
}
}
lo0 {
unit 0{
family inet {
address 10.255.168.240/32;
}
}
}
}
[edit]
protocols {
rsvp {
interface ge-0/1/0.0;
interface ge-5/2/7.0;
}
mpls {
interface ge-0/1/0.0;
interface ge-5/2/7.0;
}
ospf {
traffic-engineering;
reference-bandwidth 4g;
area 0.0.0.0 {
interface all;
interface fxp0.0 {
Copyright © 2012, Juniper Networks, Inc.110
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide