Juniper JUNOS OS 10.4

vlan-id 100;
}
unit 200 {
vlan-id 200;
}
}
3.
Configure the Ethernet interfaces and VLAN tags on Router 3:
[edit]
chassis {
aggregated-devices {
ethernet {
device-count 2; # Number of AE interfaces on router
}
}
}
interfaces ge-2/2/2 {
encapsulation flexible-ethernet-services;
vlan-tagging; # Customer interface uses singly-tagged frames
unit 100 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
interfaces ge-2/2/4 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 200-205; # This trunk port is part of VLAN range 200–205
}
}
}
interfaces ge-2/2/6 {
unit 0 {
family bridge {
interface-mode access;
vlan-id 200;
}
}
}
interfaces ge-3/3/3 {
encapsulation flexible-ethernet-services;
vlan-tagging; # Customer interface uses singly-tagged frames
unit 200 {
encapsulation vlan-bridge;
vlan-id 200;
}
}
interfaces ge-11/1/0 {
gigether-options {
802.3ad ae3;
}
}
interfaces ge-11/1/1 {
gigether-options {
Copyright © 2012, Juniper Networks, Inc.28
Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide