Juniper JUNOS OS 10.4 User Manual

802.3ad ae3;
}
}
interfaces ge-11/1/2 {
gigether-options {
802.3ad ae3;
}
}
interfaces ge-11/1/3 {
gigether-options {
802.3ad ae2;
}
}
interfaces ge-11/1/4 {
gigether-options {
802.3ad ae2;
}
}
interfaces ge-11/1/5 {
gigether-options {
802.3ad ae2;
}
}
interfaces ae2 {
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list 100, 200–205;
}
}
}
interfaces ae3 {
encapsulation extended-vlan-bridge;
vlan-tagging;
unit 100 {
vlan-id 100;
}
unit 200 {
vlan-id 200;
}
}
Related
Documentation
Ethernet Networking•
• Layer 2 Features for a Bridging Environment on page 21
• Example Roadmap: Configuring a Basic Bridge Domain Environment on page 22
• Example Step: Configuring Bridge Domains on page 30
• Example Step: Configuring Spanning Tree Protocols on page 32
• Example Step: Configuring Integrated Bridging and Routing on page 34
29Copyright © 2012, Juniper Networks, Inc.
Chapter 2: Basic Layer 2 Features on MX Series Routers

Juniper JUNOS OS 10.4 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.4
Category	Network Router
Language	English