EasyManua.ls Logo

Juniper QFX5120 Series - Page 113

Juniper QFX5120 Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
11. Configure the IP address of a backup router, which is used only while the routing protocol is not running.
[edit]
root@# set system backup-router address
12. Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
13. (Optional) Configure the static routes to remote subnets with access to the management port. Access
to the management port is limited to the local subnet.
[edit]
root@# set routing-options static route remote-subnet next-hop destination-IP retain no-readvertise
14. Configure the telnet service at the [edit system services] hierarchy level.
[edit]
root@# set system services telnet
15. (Optional) Display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
116

Table of Contents

Other manuals for Juniper QFX5120 Series

Related product manuals