Juniper SRX340 Quick Start

Quick Start
SRX340
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 5
Step 3: Keep Going | 10
Step 1: Begin
IN THIS SECTION
Meet the SRX340 | 2
Install the SRX340 in a Rack | 2
Power On | 4
In this guide, we provide a simple, three-step path, to quickly get you up and running with your new SRX340. We’ve
simplified and shortened the installation and configuration steps, and included how-to videos. You'll learn how to install
the SRX340 in a rack, power it up, and deploy it on your network using the CLI.
NOTE: We think you'll want to check out our Guided Setup: SRX300 Line Firewalls. Our Guided Setup picks
up where this Day One+ ends, providing step-by-step instructions on how to easily secure and validate your
branch location.
Are you interested in getting hands-on experience with the topics and operations covered in this guide? Visit
Juniper Networks Virtual Labs and reserve your free sandbox today! You’ll find the Junos Day One Experience
sandbox in the stand alone category.

Juniper SRX340 Specifications

General

Firewall Throughput	3 Gbps
Maximum Concurrent Sessions	256, 000
Memory	4 GB
Redundant Power Supplies	No
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Storage	8 GB