Juniper SRX340 Quick Start

What’s Next?
NOTE: Quickly configure and validate a secure branch office in a few simple steps with our Guided Setup:
SRX300 Line Firewalls. Our Guided Setup picks up where this Day One+ guide ends and is designed to quickly
get your branch location online and secured.
ThenIf you want to
Log in to J-Web and use the wizard. Alternatively, you can use the
more advanced configuration features offered by Juniper Contrail
Service Orchestration (CSO) and Juniper Sky Enterprise. To use
these services, you’ll need an account and activation code. Check
out the Contrail Service Orchestration (CSO ) Deployment Guide
and the Juniper Sky Enterprise Getting Started Guide.
Change configuration settings, get another
device up and running, or both
Visit Day One: SRX Series Up and Running With Advanced Security
Services
Set up your SRX340 with advanced security
measures to protect and defend your network
See Installing Software on SRX Series DevicesManage software upgrades on your SRX340
Visit the Security Design CenterSee, automate, and protect your network with
Juniper Security
Visit Juniper Networks Virtual Labs and reserve your free sandbox.
You’ll find the Junos Day One Experience sandbox in the stand alone
category.
Get hands-on experience with the procedures
covered in this guide
General Information
ThenIf you want to
See Activate Junos OS Licenses in the Juniper
Licensing Guide
Download, activate, and manage your software licenses to
unlock additional features for your SRX Firewall
Visit the SRX340 Documentation page in the Juniper
TechLibrary
See all documentation available for the SRX340
Start with the Day One+ for Junos OS guideConfigure the SRX340 with the Junos OS CLI
See J-Web for SRX Series DocumentationConfigure the SRX340 using J-Web
11

Juniper SRX340 Specifications

General

Firewall Throughput	3 Gbps
Maximum Concurrent Sessions	256, 000
Memory	4 GB
Redundant Power Supplies	No
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% non-condensing
Storage	8 GB