SSG 500 M Series Hardware Installation and Configuration Guide
14 Front Panel
Physical Interface Modules
Physical interface modules (PIMs) are removable and can be inserted into a slot
when the device is powered off. If a slot is unoccupied, a PIM blank panel must be
installed to shield the empty slot and to allow cooling air to circulate properly
through the chassis.
The SSG 500M Series devices support the following PIMs:
Gigabit Ethernet
Dual-Port Serial
Dual-Port T1 or E1
Dual-Port T3
Four-Port Fast Ethernet
To Next Page
Loading...
Need help?
General
