Jura E6 - Connecting the Milk System

14
1 Preparing and using for the first time
T Place a receptacle under the fine foam frother and under the
coffee spout.
T Turn the switch to thex position.
‘System is filling’, the system fills up with water.
‘Switch close’
T Turn the switch to the °position.
‘System is filling’
‘Machine is rinsing’
, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare.
Your JURA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8 °C). We would
therefore recommend using a milk cooler or a vacuum milk
container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
Connecting milk