Jura E6 - Hot Water

19
2 Preparation
T Open the cover of the grinder adjustment switch.
T Press the
‘Espresso’ button to start preparation.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
T Close the cover of the grinder adjustment switch.
To obtain a perfect water flow, use the hot-water nozzle.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:The start screen is displayed.
T Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T Attach the hot-water nozzle to the connector.
T Place a cup under the hot-water nozzle.
T Turn the switch to thex position.
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically.
‘Switch close’
T Turn the switch to the °position.
Your JURA is once more ready for use.
Hot water
J
CAUTION