25
4 Permanent settings in programming mode
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
‘>’ button (bottom right).
T Press the
‘Coffee’ button.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ appears and the coffee strength is displayed.
T Press the
‘<’ or ‘>’ button to change the setting for the
coffee strength.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘’ button for around 2 seconds to exit
programming mode.
The start screen is displayed.
By instructing your JURA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your JURA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:The start screen is displayed.
T Press the
‘P’ button.
T Press the
‘>’ button several times until ‘4/4’ is displayed.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the switch-off time.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/4’
T Press the ‘’ button to exit programming mode.
The start screen is displayed.
Automatic switch-off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
