Jura E6 - Programming Mode Settings

23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the
‘P’ button to enter programming mode. You can navigate
through the program items and permanently save the required set-
tings using the multi-function buttons. The following settings can
be made:
Program
item
Sub-item Explanation
‘1/4’ ‘Clean’,
‘Descale’,
‘Clean the milk system’,
‘Filter’ (only if filter is
activated)
T Start the required maintenance program here.
‘2/4’ ‘Rinse the coffee system’,
‘Rinse the milk system’,
‘Information’
T Here you can start the desired maintenance
program or find out what maintenance actions are
required.
‘3/4’ ‘Expert mode’
T Select your settings for specialty coffees and hot
water.
‘4/4’ ‘Choose language’
T Select your language.
‘Switch off after’
T Set the time after which the JURA should switch off
automatically.
‘Units’
T Select the unit for the amount of water.
‘Water hardness’
T Adjust the water hardness.
J WARNING