Jura E6 - Fine Foam Frother Cleaning

30
5 Maintenance
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
Harmful and irritating cleaning agent. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large
quantities of water. Do not induce vomiting. Seek medical
advice immediately and show label.
E JURA milk system cleaner is available from specialized dealers.
Precondition:The start screen is displayed.
T Press the
‘P’ button.
T Press the
‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the
‘Next’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or carton.
T Pour 8.5 oz (250 ml) of fresh water into a receptacle and add
1 capful of milk system cleaner.
T Immerse the milk pipe in the receptacle.
T Place a receptacle under the fine foam frother.
T Press the
‘Next’ button.
As soon as the machine has heated up,
‘Switch open’
appears.
T Turn the switch to thex position.
‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are cleaned.
‘Switch close’
Cleaning the fine foam
frother
J WARNING
J WARNING