Jura E6 - Frothing Milk Foam

17
2 Preparation
T Turn the switch to the °position.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Precondition:The start screen is displayed.
T Place a cup under the fine foam frother.
T Press the
‘Milk foam’ button.
‘Milk foam’
As soon as the machine has heated up, ‘Switch open’ appears.
T Turn the switch to thex position.
‘Milk foam’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
‘Switch close’
T Turn the switch to the °position.
Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Milk foam