Jura E6 - Language

27
4 Permanent settings in programming mode
In this program item you can set the language used by your JURA.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:The start screen is displayed.
T Press the ‘P’ button.
T Press the
‘>’ button several times until ‘4/4’ is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘> ’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘Deutsch’.
‘Gespeichert’ appears briefly on the display.
‘4/4’
T Press the ‘’ button to exit programming mode.
The start screen is displayed.
Language