Jura E8 - Page 12

12
1 Preparing and using for the first time
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘<’ or ‘>’ button to change the water hardness
setting, for example to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Use filter’
E Now decide whether you want to operate your JURA with or
without a CLEARYL Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see
Chapter 1 ‘Preparing and using for the first time – First-time use with
filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge
activation’).
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Place a receptacle (at least 10 oz or 300ml) under the
professional fine foam frother.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
First-time use with filter
cartridge activation
NOTICE
é
è