Jura E8 - Filter Management and Cleaning

31
5 Maintenance
T Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
T Dismantle the professional fine foam frother into its
individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250 ml) cold water and 1 capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the professional
fine foam frother.
T Firmly attach the professional fine foam frother to the
Connector System
©
.
Your JURA no longer has to be descaled if you are using the CLEARYL
Smart filter cartridge. If you did not insert the filter cartridge the first
time you used the machine, you can do this now as follows.
Precondition:The start screen is displayed.
T Place a receptacle (at least 10 oz or 300ml) under the
professional fine foam frother.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
é
è
Inserting the filter
é
è