Jura E8 - Beverage Preparation Guide

15
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
E The display shows four products you can prepare. Press the
‘>’ button to display more products.
E You can stop the machine at any time while a specialty coffee
or hot water is being prepared. Just press any button.
E During the grinding operation you can select the
coffee strength of single products by pressing the
‘<’ and
‘>’ buttons.
E During preparation you can change the preset amounts
(e.g. water and amount of milk) by pressing the
‘<’ and
‘>’ buttons.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. The full coffee aroma can develop only in
prewarmed cups. You can purchase a JURA cup warmer from your
specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
J WARNING