Jura E8 - Connecting the Milk System

14
1 Preparing and using for the first time
T Place one receptacle under the coffee spout and another
under the professional fine foam frother.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling’, the system fills up with water.
‘Machine is heating’
‘Machine is rinsing’
, water flows out of the coffee spout. The
rinse stops automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
Your JURA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46°F (4–8°C). We would therefore
recommend using a milk cooler or a vacuum milk container.
T Remove the protective cover from the professional fine
foam frother.
T Connect the milk pipe to the professional fine foam frother.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
é
è
Connecting milk
é
è
é
è