23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the ‘Pc’ button to enter programming mode. You can navi-
gate through the programme items and permanently save the
required settings using the multi-function buttons. The following
settings can be made:
Programme
item
Sub-item Explanation
‘1/6’ ‘Clean’,
‘Descale’,
‘Clean the milk system’,
‘Filter’ (only if filter is
activated)
T Start the required maintenance programme here.
‘2/6’ ‘Rinse the milk system’,
‘Rinse the coffee system’,
‘Information’
T Here you can start the required maintenance
programme or find out what maintenance actions
are required.
‘3/6’ ‘Expert mode’
T Select your settings for speciality coffees and hot
water.
‘Customise cup fill volume’
T Disable the function "Permanently setting the
amount of water for the cup size".
‘One-off settings’
T Specify whether or not to allow one-off settings
during preparation.
‘Lock/enable’
T Enable or disable individual products.
‘4/6’ ‘Choose language’
T Select your language.
‘Units’
T Select the unit for the amount of water.
‘Switch off after’
T Set the time after which the JURA should switch
off automatically.
‘Rinse the milk system’
T Change the setting for the milk system rinsing.
‘5/6’ ‘Water hardness’
T Adjust the water hardness.
‘6/6’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and view the
number of maintenance programmes performed.
To Next Page
Loading...
