Jura WE8 - Unit for Amount of Water; Language

28
4 Permanent settings in programming mode
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘5/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘Deutsch’.
‘Gespeichert’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
Unit for amount of water
Language