33
5 Maintenance
T Carefully remove the professional fine foam frother from the
Connector System
©
by twisting slightly.
T Dismantle the professional fine foam frother into its individ-
ual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation of the professional fine
foam frother.
T Firmly attach the professional fine foam frother to the Con-
nector System
©
.
Your JURA no longer has to be descaled if you are using the CLARIS
Pro Smart filter cartridge. If you did not insert the filter cartridge the
first time you used the machine, you can do this now as follows.
T Remove and empty the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
Rinsing of the filter stops automatically.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
é
è
Inserting the filter
To Next Page
Loading...
Need help?
General
Weight and Dimensions
