Just Motion Control 2DM556 - Page 23

Shenzhen Just Motion Control Electro-mechanics Co., Ltd 0755-26509689
- 23 -
(P16)
Speed
smoothness
(P17)
This parameter is set to control the smoothness of
the speed of the motor while acceleration or
deceleration, the larger the value, the smoother the
speed in acceleration or deceleration.
1
2
10
…
0
Enable of
position memory
(P18)
This parameter is set to enable the function of
position memory. 0 means disable, while 1 means
enable. If set 1, the 2DM556 can remember the
position of motor in the next time of power on.
User-defined
inductance of
motor
(P19)
This parameter is set the inductance of motor. 0
means 2DM556 gets the inductance by control
algorithm of Parameter auto-setup, while 1 means
2DM556 gets the inductance through user sets.
User-defined
resistance of
motor
This parameter is set the resistance of motor. 0
means 2DM556 gets the resistance by control
algorithm of Parameter auto-setup, while 1 means