JVC BM-H2000PN User Manual

6-1
16
STATUS DISPLAY (setting the status display to on/off)
When the power is turned on or the input mode is switched, the status
display (colour system and input mode) appears on screen. The display can
be set to on or off.
CONTROL LOCK (deactivation of front-control functions)
Set CONTROL LOCK to ON on screen to deactivate the front-control
functions (front VOLUME control and remote volume control are operable).
@ If you atternpt to operate a locked
function, "CONTROL LOCK ONI!”
appears on screen for approx. 2
seconds to indicate the function
cannot be operaied.
e Gnee CONTROL LOCK is deacti-
vated, the currant settings of the
frant-coftrol knebs and buttons are
activated:
@ If the power is turned off with
CONTROL LOCK activated, the
function is kapt in memory.
MENU and/or SET-UP MENU settings including added changes can be reset (initialised) to
their factory-preset conditions.
To initialise MENU settings only
MENU settings (except MEMORY MODE and RGB/COMPO(SDI)) can be
exclusively reset:
1. With the '¥ button pressed, press the MENU button to display [V on screen.
2. @ Press the ENTER button to reset.
@ Press the < or button to cancel.
@ MENU and PICTURE ADJUST settings (except MEMORY MODE
and RGB/COMPO(SDI)) can also be simultaneously reset via
the optional wireless remote control unit:
1. Press the MENU key to display MENU on screen.
2. Press the RESET key to execute.
To initialise both MENU/SET-UP MENU settings
MENU and SET-UP MENU settings other than MEMORY MODE and RGB/
COMPO(SD!) can be reset at the same time. In this case, PICTURE ADJUST
settings via remote control are aiso reset, and the monitor's [iD number is
also reset to 00.
1. Press the POWER switch to turn the power off.
2. With the ¥ and MENU buttons pressed, press the POWER switch to turn the
power on. Keep pressing the W and MENU buttons until [2] appears on screen.
3. Press the A or ¥ bution to select SET-UP MENU RESET. Then press the
ENTER button to display (3] on screen.
4. Press the ENTER button again to execute.
@ Press the 4 or ® button to cancel.
@For lactory-prasets on the MENU
settings, see page 21
i <MENU> RESET
Are you sure 7
“Yes” then een)
CIN I TIALIZE MENU > |
iD NUMBER SET |
P<SET-UP MENU> RESET
< SET-UP MENU> RESET
Are you sure 7
17

JVC BM-H2000PN Specifications

General

Brand	JVC
Model	BM-H2000PN
Category	Monitor
Language	English