EasyManua.ls Logo

JVC Connected Cam GY-HC500U - Display Screen in Media Mode; Playback Information Display; Playback Navigation and Status; Clip and Media Status Indicators

JVC Connected Cam GY-HC500U
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display Screen in Media
Mode
When the display setting for [
LCD/VF] B [Display
On/Off] is set to “Off”, the corresponding display is
hidden.
Memo :
0
Display on the information display area can be
toggled using the
[ONLINE/3
] button.
0
When the display setting for [LCD/VF] B
[Display On/Off] is set to “On”, the display screen
appears only in the following cases if it has been
turned off.
0
During event display or warning display
.
Jan 24,2019
3840x2160
30p 140M
282min
12 :34 :56
00: 00:00.00
1000/2000
0
4030 20 10 0
A
KL
O
P
N
E
H
I
J
B
D
C
FG
Q M
A
Voltage/Battery Power
Displays the
current status of the power supply
in use.
(A P37 [Power Status Display] )
Memo :
0
Even when the display screen is turned off and
[LCD/VF] B [Display On/Off]
B [Battery] is set to
“Off”, this will be displayed when there is a
warning.
B
Resolution
Displays the video image resolution.
C
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
D
Operation Guide
Displays a guide for the current operation
buttons.
E
Audio Level Meter
Displays the audio levels of CH1 and CH2.
.
4 030 20 10 0
0
The display appears when the volume (0 to
15) of the headphone or speaker changes.
(A P166 [Volume Operation Indicator] )
F
Position Bar
Displays the current position in the video.
During trimming, the position bar appears in
green, and icons for the in and out points are
displayed.
6
: Current position of the video
7
:
Position to start trimming
(In point)
8
: Position to end trimming
(Out point)
G
Volume Operation Indicator
Displayed when there are changes made to the
volume of the headphone(x), speaker(K) (0
to 15), the values of LCD BRIGHT (E) or
PEAKING (J) (-10 to +10).
H
Information Display
Use the [ONLINE/3] button to switch between
camera information display, GPS display and
turning off the display.
0
The GPS display displays information on the
recording location of the video being played
back only when GPS information has been
recorded.
0
Camera information display displays only
information of Gain, Iris, Shutter and White
Balance that have been recorded.
.
5600K
1/100
F1.6
0
dB
+35.483197
+139.652172
GPS Display
Camera Information Display
Display Off
Memo :
0
Trimming information is displayed while
trimming is
in progress. In this case, pressing the
[ONLINE/3] button does not switch the display.
0
The information display area is not subject to the
display settings of the items in [LCD/VF] B
[Display On/Off].
172
Display Screen in Media Mode
Display/Status Screen

Table of Contents

Related product manuals