JVC Connected Cam GY-HC500U - Saving and Loading Network Connection Settings; Saving Connection Settings to File; Loading Connection Settings from File

5
Select [Store]
and
press the Set button (R).
.
5
4
6
Save the file.
0
A confirmation screen appears when you
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and
press the Set button (R). Saving
starts, and “Storing...” appears on the screen.
.
:KAMAKURA
6
Cancel
Overwrite
CAM3
Setup?
Overwrite Connection
0
Saving starts,
and “Storing...” appears on the
screen when the file is newly saved.
.
Storing...
7
Saving is complete.
After saving of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
Reading the Connection Settings File
1
Select [Network] B [
Connection Setup
] B
[Setup File] and press the Set button (R).
2
Select [Load] and
press the Set button (R).
.
2
3
Select the file to read using the cross-
shaped button (JK), and press the Set
button (R).
.
3
4
Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and “Loading...” appears on
the
screen.
.
:YOKOHAMA
4
Cancel
Load
CAM2
Setup?
Load Connection
5
Reading is complete.
After reading of the file is complete, “Complete”
appears on the screen, and the menu screen
closes automatically.
210
Managing the Network Connection Settings File
Network