JVC Connected Cam GY-HC500U - IFB (Return Audio)

IFB (Return Audio)
Return audio from the network can be played
through a headphone.
Memo :
0
This feature
is only usable in the Camera mode.
0
Start the encoder before activating Return over
IP. To end, turn off Return over IP before shutting
down the encoder.
0
This feature is available when [System] B
[Record Set] B [Record Format] B [System] is
set to “HD” or “SD”. When [WFrame Rate] is set
to “24p”, this feature is not available.
(A P138
[ Return over IP... ] )
Configuring the Return over IP Server
Configure the Return over IP settings and establish
the connection before displaying the return audio.
1
Register the [Return Server].
Configure [Network] B [Return over IP] B
[Server]
to “Server”.
Configure the individual settings in the [Return
Server] item.
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
0
Configure “Icecast” to [Type].
Operates as IFB when the setting is configured
to “Icecast”.
Return Audio from the Network (IFB)
1
Set the camera recorder to the Camera
mode.
(A P
24 [Operation Modes] )
2
Assign
the “Return over
IP” function to any
of the user buttons.
(A P46 [Assignment of Functions to User
Buttons] )
Memo :
0
The “Return over IP” feature can also be
operated using
“On”/“Off” under [Network] B
[Return over IP] B [Return over IP].
3
When [WFormat] is configured to
“QuickTime (MPEG2)” or “MXF(MPEG2)”,
configure [Network] B [Return over IP] B
[Function] to “Enable”A
(A P
145 [ Function A
] )
4
Press the user button that is assigned with
the “Return over IP”
function.
When Return over IP is activated, the settings
in [A/V Set] B [Audio Set] B [IFB/RET Monitor]
will be applied to the audio.
(A P137 [ IFB/RET Monitor... ] )
228
IFB (Return Audio)
Network