EasyManua.ls Logo

JVC Connected Cam GY-HC500U - Uploading Clips Manually (Manual FTP)

JVC Connected Cam GY-HC500U
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Uploading Clips Manually (Manual FTP)
The following are steps to upload clips recorded in
a recording media to a preset FTP server.
All playable clips on the thumbnail screen can be
uploaded.
1
Configure the FTP server for manual
uploading.
Set [Network] B [Upload Settings] B [Upload]
to “Manual”.
(
A P148 [ Upload ] )
2
Register the [Clip Server].
0
Open the
[Network] B [Upload Settings] B
[Clip Server] screen.
0
Register the server to upload recorded clips
in the recording media to.
Up to 4 servers can be registered.
(A P149 [ Clip Server ] )
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
0
When [Network] B [Upload Settings] B [Upload]
is configured to “Auto”, manual uploading is also
disabled for slots other than the selected “Slot”.
To perform manual uploading, select “Manual”.
0
FTP transfer is disabled when [System]
B
[Record Set] B [Record Format] B [System] is
configured to “High-Speed”. To perform FTP
transfer, select a setting other than “High-
Speed”.
Uploading a Video Clip
1
Set the camera recorder to the Media mode.
0
Press and hold the [MODE] selection button
in the Camera mode to enter the Media
mode. A thumbnail screen of the clips
recorded on the recording media is
displayed.
0
You can upload the selected clips on the
thumbnail screen to the FTP server.
(A P97 [Thumbnail Screen] )
2
Move
the cursor to the clip to be uploaded.
Move the cursor to the clip to be uploaded using
the cross-shaped button (JKH I).
.
2
3
Press the [ONLINE/3] button.
The action selection screen is displayed.
.
All Clips
Selected Clips
This Clip
3
4
Select [FTP Upload] B [This Clip]
B server
to upload to, and press the Set button (R).
The status of the transfer process is indicated
by a progress bar.
.
Upload in Background
Stop
FTP Upload
Memo :
0
The name for the server to upload files to are
indicated using the preset names in [Clip
Server]
B [Alias].
0
To stop uploading, press the Set button (R).
Select [
Yes] on the confirmation screen, and
press the Set button (R) to stop uploading and
return to the thumbnail screen.
Uploading a Recorded Video Clip
191
Network

Table of Contents

Related product manuals