Controlling Audio
48
Controlling Audio
You can adjust the various settings such as
audio balance or subwoofer level.
1 Press the [MENU] button.
MENU screen appears.
2 Touch [ ].
See the following section for each
setting.
• Set up speaker/ X’over (P.48)
• Controlling equalizer (P.50)
• Set listening position/ DTA (P.52)
• Controlling general audio (Fader /
Balance) (P.49)
• Set volume offset (P.51)
• Set sound effect (P.51)
Speaker/ X’over setup
1 Press the [MENU] button.
MENU screen appears.
2 Touch [ ].
Audio screen appears.
3 Touch [Speaker/Xʼover].
4 Select a car type.
You can setup the car type and speaker
network, etc.
If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each
channel) to have the highest surround
effects.
5 Touch the speaker (1) you wish to adjust
and set each item (2) as follows.
1
2
■ [Speaker]
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
■ [Location] (Only for Front, Rear)
Select the speaker position you have fixed.
To Next Page
Loading...
Need help?
General
