1-28 (No.PA045<Rev.001>)
(4) Start up the updater application, and select from the menu
at the top of the application [Settings] -> [Advance mode].
Once selected, a menu will pop up, prompting you to enter
a password. Enter [hercules], and press the [OK] button.
(5) A [Manually switch to download mode] checkbox appears
on the application screen. Select the checkbox.
(6) Press [Update Firmware] of the application to start update
of the firmware forcibly.
The remaining steps are the same as normal update pro-
cedure.
To Next Page
Loading...
