JVC DM65USR - Setup and Connections; Unpacking and Stand Assembly

10
Attaching the Stand
The stand installation varies depending on
model. Perform the installation according to the
instructions of your TV model.
Unpacking the TV
1 Remove TV accessories and protective foam.
2 Remove TV from the box and place it on a at
and clean surface with TV screen facing down.
3 Attach the metal bracket to the stand using the
provided screws. (DM65USR model only)
4 Attach the stand to TV using the provided
screws.
Removing the Stand
When the TV needs to be transported, remove the
stand and pack the TV back in the carton.
To remove the stand, perform the assemble steps
in reverse order according to your TV model.
DM85UXR Base Assembly
DM65USR Base Assembly