What to do if my JVC EM42FTR has no power?
If your JVC LED TV isn't turning on, first ensure the power cord is securely plugged into the outlet. Then, press the Power button on the TV to turn it on. If it still doesn't work, try plugging the TV into another outlet. As a last resort, unplug the unit for an hour, and then plug it back in.
Why is there poor picture or no picture on my JVC LED TV?
If you're getting a poor picture or no picture on your JVC LED TV, try tuning to another channel to rule out issues with the current channel or cable TV. Ensure that channels are properly set into memory. Check the antenna or cable TV connections to make sure they are secure. Also, check for possible sources of interference.
Why does my JVC LED TV shuts off by itself?
If your JVC LED TV is shutting off unexpectedly, the sleep timer may be enabled; disable it in the settings. Also, check the power connection to ensure that the power is not interrupted.
What to do if my JVC EM42FTR LED TV remote control does not work?
If your JVC LED TV remote isn't working, start by checking the batteries to ensure they are not weak, dead, or inserted incorrectly. Then, point the remote directly at the remote sensor on the TV, keeping an angle of 35º. Remove any obstacles that might be blocking the signal between the remote and the TV. Finally, make sure you are within range of the TV.
How to fix no CATV reception on JVC LED TV?
If you're not getting any CATV reception on your JVC LED TV, begin by checking all cable TV connections to ensure they are properly connected. Then, set the TV Mode in the Channel menu.
Why is there poor sound or no sound on my JVC EM42FTR LED TV?
If you're experiencing sound issues with your JVC LED TV, try these steps: First, press the VOL button on the remote or the Power/Multi Function button on the TV to adjust the volume. Also, make sure the mute function isn't enabled by pressing the MUTE button on the remote. Try tuning to another channel, as the current channel or cable TV might be experiencing problems. Finally, check the TV audio settings and check for any potential sources of interference.
Why is the reception poor on some channels on my JVC EM42FTR?
If you're experiencing poor reception on certain channels with your JVC LED TV, try tuning to another channel to see if the issue persists, as the problem may be with the channel or cable TV itself. Ensure that channels are set into memory. Adjust the antenna to improve reception if the network signal is weak. Also, check for possible sources of interference.
What to do if closed caption is not activated on JVC EM42FTR LED TV?
If closed captioning isn't working on your JVC LED TV, it could be that the program you're watching is not closed captioned; try another channel. You can also enable Closed Caption in the menu.
Guidelines for safe TV placement and usage to protect children from injury.
Precautions for condensation, panel handling, and electrical safety.
Guide to unpacking, stand attachment, package contents, and device connections.
Covers TV setup, basic functions, input selection, menu navigation, and channel management.
Details on multimedia playback, audio modes, and wall mount installation.
Common issues, solutions, and detailed technical specifications for the TV.
Instructions for setting up, using, and troubleshooting the Roku Streaming Stick.
Information on warranty coverage, terms, legal notices, and data handling.
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 42 \ |
| Display brightness | - cd/m² |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 6000000:1 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | CrystalMotion 120 Hz |
| 3D | No |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| Audio system | Dolby Digital |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | - |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Power consumption (standby) | - W |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth (with stand) | 195.58 mm |
|---|---|
| Height (with stand) | 614.68 mm |
| Weight (with stand) | 8001 g |
| Depth (without stand) | 63.5 mm |
| Width (without stand) | 957.58 mm |
| Height (without stand) | 561.34 mm |
| Weight (without stand) | 7203 g |
To Next Page
