Taking Group Shots (Self-timer)
The 10-second self-timer and Face Detection self-timer are convenient
functions for taking group photos.
The 2-second self-timer is useful for preventing camera shake caused by
pressing the shutter button.
*The following is a screen of the model with Wi-Fi functions.
Memo :
When shooting a photo using the self-timer function, use of a tripod is
recommended.
“Tripod Mounting” (A p. 21)
Using the 2-/10-second Self-timer
1
Open the LCD monitor.
.
0
Check if the recording mode is B.
0
If the mode is A video, tap A on the recording screen to display the
mode switching screen.
Tap B to switch the mode to still image. (You can also use the A/B
button on this unit.)
2
Tap “MENU”.
.
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
4
Tap 1 on the lower right of the screen.
.
5
Tap “SELF-TIMER”.
.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Tap “2SEC” or “10SEC”.
.
7
Set the focus on the subject.
.
0
When focused, the focus icon lights up in green.
8
Take a still image.
.
0
A timer appears and countdown to shooting starts.
0
To stop the self-timer, press the SNAPSHOT button again.
Recording
58
To Next Page
Loading...
