5
Tap “SENDER'S EMAIL”.
(Operation on this camera)
.
0
Enter the e-mail address and tap “SET”.
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
6
Tap “SMTP SERVER” (not necessary in the case of Gmail)
(Operation on this camera)
.
0
Enter the SMTP server and tap “SET”.
.
0
This is automatically configured if the sender’s mail address is Gmail.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
7
Tap “SMTP PORT” (not necessary in the case of Gmail)
.
0
Change the SMTP port number (if necessary) and tap “SET”.
.
0
This is automatically configured if the sender’s mail address is Gmail.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
8
Tap “AUTHENTICATE METHOD” (not necessary in the case of Gmail)
.
0
Tap the desired “AUTHENTICATE METHOD”.
.
0
This is automatically configured if the sender’s mail address is Gmail.
Using Wi-Fi
31
To Next Page
Loading...
