MENU SCREEN EXPLANATIONS
Menu Screen Available Using The Select Wheel
FOCUS Refer to "Focusing" (_ / pg. 28).
EXPOSURE Refer to "Exposure ( rlntrol" (_Z_ pg. 26).
M.W.B. Refer to "White Balance Adjustment" and "Manual White Balance Operation"
WiDE
S.LX
(z7 pg. 29).
ON
!iNiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i i!!
NORMAL
Does not display black bars.
Allows you to recrlrd black bars at the top and bottom of the screen
to produce a cinema-like "wide-screen" effect.
To record a subject in a darldy lit environment, when it is more
convenient to shoot the subject with a brighter image even if tile
picture becomes slightly coarse.
To record a subject in a dimly lit environment, when it is more
convenient to shoot with a less coarse picture although the
subject becomes slightly dark. This setting is suitable for
measuring sensitivity conforming to EIA-639 (EIA* Standard for
Low Light Sensitivity Measurement).
*EIA : Electronic Industries Alliance
OFF Allows you to shoot darl< scenes with no picture brightness
adjustlT/ent
TITLE Allows you to superimpose one of eight preset titles (_z_ pg. 25).
DATE/T[M[:: Makes the date/time settings appear in the camcorder or on a c(innected monitor
DISP. (_7 pg. 25).
Menu Screen Available Using The MENU Button
This Menu Screen cannot be accessed while recording.
D. ZOOM
TELE MACRO
OFF
Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 16X (the optical
zoom limit), to a maximum of 300X digital magnification.
Digital Zoom is not available. Only optical zoom (maximum
16x magnification) can function. When set to "(-)FF" during
Digital Zoom, zoom magnification changes to 16X.
Usually the distance t(! a subject where the lens is in focus
depends on tl_e zoom magnification. Unless there is a distance of
more than 1 m (3.25 ft.) to the subject the lens is out of ff)cus at
the maximum telephoto setting. When set to "ON", you can
shoot a subject as large as possible at a distance of approx. 60 cm
(23-5/8").
• Depending on the zoom position, the lens may go out of focus.
: Factory-preset
CONTINUED ON NEXT PAGE
To Next Page
Loading...
